نرم افزار UniPile

نرم افزار UniPile یکی از نرم افزارهای کاربردی شرکت UniSoft برای تجزیه و تحلیل شمع ها و گروه های شمع می باشد.

نرم افزار UniPile از نرم افزارهای معتبر در زمینه مهندسی ژئوتکنیک می باشد که قابلیت هایی مثل تعیین ظرفیت باربری شمع ، تعیین نشست گروه شمع ، شبیه سازی رفتار حرکت بار شمع در تست بارگذاری و … را دارد.

این نرم افزار برای داده های آزمایش نفوذ مخروط (CPT & CPTU) از روش های

• Schmertmann & Nottingham
• deRuiter & Beringen
• Bustamente
• Eslami & Fellenius

و برای داده های آزمایش نفوذ استاندارد (SPT) از روش های

• Meyerhof
• O’Neill-Reese
• Decourt

برای تخمین ظرفیت باربری شمع ها استفاده میکند.

گزارشات مربوط به نتایج محاسباتی نرم افزار به صورت نمودار نمایش داده میشود و میتوانید خروجی محاسبات را به فرمت اکسل یا فرمت متن ذخیره کنید.

 

UniPile Release History

v.5.0.0.60 (Jan 10, 2022)
 Correct Integer conversion for fr-CA culture
v.5.0.0.59 (June 24, 2019)
 Fix input forms freezing caused by C1.Win Components previous update
v.5.0.0.58 (May 17, 2019)
 Update activation code algorithm to handle foreign cultures
v.5.0.0.57 (June 2, 2017)
 Correct calculation precision of pile resistance transition height
v.5.0.0.56 (April 12, 2017)
 Correct conversion of cell location during bidirectional (O-Cell) test simulation
v.5.0.0.55 (January 29, 2017)
 Correct SI/US conversion and importing for culture using comma as a decimal separator
v.5.0.0.54 (January 9, 2017)
 Disregard water pressure acting on lower cell in bidirectional loading test
v.5.0.0.53 (November 22, 2016)
 Improve connection to dataset
v.5.0.0.52 (September 26, 2016)
 Adjust network activation for Dropbox, OneDrive, and Google Drives
v.5.0.0.51 (July 23, 2016)
 Improve activation procedure when using Map drive letter
v.5.0.0.50 (June 23, 2016)
 Improve activation procedure for network license
v.5.0.0.43 (March 1, 2016)
 Validate length of “Name” field to 50 characters
v.5.0.0.42 (February 25, 2016)
 Update EXE executable to include latest License.licx
 Correct CDBL conversion error for Chin-Kondner, Hansen, and Zhang t-z/q-z functions for
European culture
v.5.0.0.40 (October 7, 2015)
 Update Setup for Windows 10 install
 Add Project Name to all graphs
 Correct Project Name entry when printing data and results
 Improve taper effect calculation for SPT methods
 Chin-Kondner Hyperbolic: Decrease minimum accepted value for C1 from 0.005 to 0,000001
 t-z/q-z Functions: revise “ultimate resistance” term to “target resistance”
 Increase maximum load from 1,000,000 kN to 10,000,000 kN (~2,248,090 kips)
v.5.0.0.39 (April 12, 2015)
 Correct calculation of transition height/drag force for when unit shaft resistance decreases
with depth
 Correct display of drag force in design summary when neutral plane is at the toe
 Override neutral plane to match equivalent raft in pile group settlement analysis
 Improve precision of 2:1 stress distribution under elongated footings
v.5.0.0.38 (February 11, 2015)
 Improve head-down loading test simulation precision
 Check for Zhang Gamma(Γ) < 0
 Add Network Users Management
v.5.0.0.37 (December 6, 2014)
 Update grid control for compatibility with Chinese Windows 7/8 interface
v.5.0.0.36 (November 2, 2014)
 Correct soil settlement calculation below pile neutral plane for swelling soils
v.5.0.0.35 (October 6, 2014)
 Update User manual to 5.04
 Update Examples manual to 5.07
 Add Demo Examples 11 and 12
v.5.0.0.34 (October 3, 2014)
 Add Decourt (SPT) and O’Neill & Reese (SPT) methods
 Add Sandy Silt and Clayey Silt soil type to accommodate Decourt (SPT) method
 Include water pressure acting on lower cell in bidirectional loading test
 Improve accuracy of buoyancy in bidirectional loading test
 Correct validation of Shoulder Area Ratio, a, for Eslami-Fellenius method
 Revise unit shaft resistance in pile resistance result
 Adjust unit shaft resistance at soil layer boundaries
 Correct file format when exporting CPT/CPTu data to text file
 Revise “Check for Latest Release” feature
 Educational Version: Increase allowable pile embedment length to 50m (165 ft)
 Add Demo Example 10
v.5.0.0.33 (March 3, 2014)
 Correct calculations of submerged excavations with negative GWT (i.e. lake condition)
 Improve exporting of soil data to XMLU
v.5.0.0.32 (February 10, 2014)
 Update examples manual and demo examples
 Add “Convert To Static Method” feature
 Revise calculation of equivalent Beta
 Add resistance method and pile embedment to status bar
 Rename O-Cell to Bidirectional
 Rename Drag Load to Drag Force
 Add records capture option when importing SPT and CPT data
 Correct Eslami-Fellenius toe resistance calculation of Infinity
 Update tool bar for 125% fonts
v.5.0.0.31 (November 21, 2013)
 Update for setup on Windows R8.1
 Add online registration and activation
 Improve user validation for CPT and SPT methods
 Improve toe resistance calculations for Bustamente-LCPC (CPT) method for CPT records
with spread larger than 0.75*Pile Diameter
v.5.0.0.30 (October 7, 2013)
 Improve user defined ultimate movement limit in T-Z/Q-Z graph
 Improve t-z/q-z graph synchronization in Ratio Function
 Remove 0.5<b<3 limit on exponent coefficient, b (t-z/q-z Exponential function)
 Remove 0<a<0.01 limit on Zhang Coefficient, a (t-z/q-z Zhang function)
v.5.0.0.29 (September 30, 2013)
 Correct and improve importing of CPT/CPTu data for other cultures and regions
 Correct movement scale in T-Z/Q-Z graph
 Add user defined movement limit to T-Z/Q-Z graph
 Update examples manual and add Examples 8 and 9
v.5.0.0.28 (July 23, 2013)
 Improve validation of Zhang Coefficient, a
 Correct scaling of t-z/q-z functions graph under when using US units
 Add residual load status to loading test simulation graphs
 Update Examples Manual (V.5.04)
v.5.0.0.27 (July 5, 2013)
 Correct effective stresses at ground surface when loads with negative elevation are specified
 Update Examples Manual (v.5.02)
v.5.0.0.26 (June 27, 2013)
 Correct calculation of loading test simulation for US Customary units
v.5.0.0.25 (June 24, 2013)
 UniPile 5.0 Official Release

 

 

 

 

لایک2